CD60-A Motor Start Capacitor
CD60-A Motor Start Capacitor
Features and use:
lt applies to A.C.single phase motor,with frequency 50/60Hz,rated voltage 110-330VAC. lt can help motors gain high torque with low starting current and make motorstart nomally.lt can also start tore frigerators and compressors of air condition,etc.
Technical Specifications
Working Temperature Range | -25-55℃ |
| Rated Voltage Range | 110-330VAC |
| Rated Capacitance Range | 50-1000uF |
| Dissipation Factor | Tan ≤ 0.01 (50 Hz) |
| Rated Tolerance of capacitance | 0-20% |
| Without Voltage Between Terminal | Apply 1.25 times working voltage, for 2 Seconds,with out break down or explosion |
| Withstand Voltage Between Terminal and case | 2000Vac ,for 10 seconds,without break down or explosion |
Dimension:
| Capacitance μF | Rated Voltage 115VAC | Rated Voltage 165VAC | Rated Voltage 200-250VAC | Rated Voltage 330VAC |
| 50 | 34×80 | 34×80 | 34×80 | 34×80 |
| 75 | 34×80 | 34×80 | 34×80 | 34×80 |
| 100 | 34×80 | 34×80 | 42×70 | 42×70 |
| 150 | 34×80 | 34×80 | 42×70 | 42×70 |
| 200 | 42×70 | 34×80 | 42×70 | 42×70 |
| 250 | 42×70 | 42×70 | 42×70 | 50×100 |
| 300 | 42×70 | 42×70 | 42×70 | 50×100 |
| 350 | 50×100 | 42×70 | 42×70 | 50×100 |
| 400 | 50×100 | 50×100 | 50×100 | 50×100 |
| 500 | 50×100 | 50×100 | 50×100 | 50×100 |
| 600 | 50×100 | 50×100 | 50×100 | 50×120 |
| 700 | 50×120 | 50×120 | 50×120 | 50×120 |
| 800 | 50×120 | 50×120 | 50×120 | 50×120 |
| 1000 | 50×120 | 50×120 | 50×120 | 50×120 |
note:
Special specs are available on request
